|
Do it yourself
| |||
| ||||
Replacing the Drive Belt on the Honda Dio
Model: Honda Dio
Video tutorial
This guide briefly explains how to remove and replace the drive belt on the Honda Dio scooter by following these simple steps. First, place your scooter on the centre stand and start unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and the clutch bell to access the drive belt, as shown in the video. Now remove and replace the belt with a new one, as well as the original; then reassemble the transmission!
Updated on 3 July 2026 by ScegliAuto
Related tutorials
Dio
You can replace the front shock absorber on the Honda Dio by loosening the screws that secure it to its housing: start by loosening the bolt located …
Dio
To set the clock on the Honda Dio, turn the ignition key in the ignition switch to power up the instrument panel. Once the panel is on, press and hol…
Dio
You can replace the transmission belt of the Honda Dio by loosening the screws that secure the transmission cover: this is located near the rear whee…
|
How to Change the Engine Oil of the Piaggio Liberty 125?
To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By unscrewing the plug, you can collect the used oil in a suitably positioned container. Above the drain plug, you will also find the oil filter, which needs to be removed from its housing and replaced with a new spare part. After the replacement, top up by adding oil through the designated breather. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |