|
Do it yourself
| |||
| ||||
To set the clock on the Honda Dio, turn the ignition key in the ignition switch to power up the instrument panel. Once the panel is on, press and hold the button at the top left of the panel, noting that some elements will start to flash. Continue holding it until the hours start to flash; these can be adjusted with single presses of the same button. Then, by holding it again, you will notice the minutes flashing, which can be modified in the same manner.
Updated on 26 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Dio
In this tutorial, you will see how to set the time on the Honda Dio scooter, an extremely simple and quick task, to be done after disconnecting the b…
Dio
In this tutorial, see how to set the time on the Honda Dio scooter, an extremely simple and quick operation, for example after replacing the battery …
Dio
To change the engine oil on a Honda Dio, loosen the drain plug located at the bottom of the bike, near the beginning of the exhaust. This will allow …
|
How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
