Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Dio
Part: Clock

To manually set the correct time on your Honda Dio 125, follow these steps. First, insert the key and turn on the ignition, then locate the button to the left of the display and hold it down until the green LEDs start to flash. At this point, continue to hold the same button and proceed to change the hour digit. Next, move on to the minutes and adjust them as necessary. Now that you have set the correct time, you can turn off the ignition, and the procedure is successfully complete.

Posted on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber on the Honda Dio
How to Replace the Front Shock Absorber on the Honda Dio
Dio You can replace the front shock absorber on the Honda Dio by loosening the screws that secure it to its housing: start by loosening the bolt located …
How to Set the Time on the Honda Dio Scooter?
How to Set the Time on the Honda Dio Scooter?
Dio In this tutorial, see how to set the time on the Honda Dio scooter, an extremely simple and quick operation, for example after replacing the battery …
How to Set the Clock on the Honda Dio?
How to Set the Clock on the Honda Dio?
Dio To set the clock on the Honda Dio, turn the ignition key in the ignition switch to power up the instrument panel. Once the panel is on, press and hol…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos