Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Dio
Part: Shocks

You can replace the front shock absorber on the Honda Dio by loosening the screws that secure it to its housing: start by loosening the bolt located at the front wheel, then proceed to loosen the one at the top of the shield. Once the shock absorber is free, position the new replacement part: now secure it with the appropriate screws and remount the wheel. This way, you can verify that everything functions correctly.

Posted on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Dio To change the engine oil on a Honda Dio, loosen the drain plug located at the bottom of the bike, near the beginning of the exhaust. This will allow …
Dio In order to replace the belt of the Honda Dio, you need to loosen the screws that secure the transmission protection panel: this panel will be locate…
Dio In this tutorial we can see how to replace the engine oil in the Honda Dio scooter, an extremely simple and quick operation, to be carried out every …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos