|
Do it yourself
| |||
| ||||
|
Model: Tm Racing Smr 300
To replace the exhaust pipe of the TM Racing SMR 300, you will need to loosen the screws that secure the panel located on the right side of the bike near the rear fender. Once the panel is removed, you will be able to locate the screws that hold the exhaust terminal in place. You will need to loosen these screws and widen the ring that connects the exhaust pipe to the manifold. At this point, you can insert the new exhaust terminal, connecting it with the clamp and fixing it back to its supports.
Posted on 3 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Smr 300
To change the engine oil in a TM Racing SMR 300, loosen the screw that secures the drain plug at the lower central part of the bike. Once the plug is…
Smr 300
You can replace the air filter on the TM Racing SMR 300 by loosening the screws that secure the side cover panel of the bike, located just beneath th…
Smr 300
To replace the headlight bulb on the TM Racing SMR 300, loosen the screws securing the front fairing of the bike, located just in front of the handle…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
