Do it yourself
Frequently asked questions about cars and motorcycles
Today, we will see in this guide how to replace the engine oil in a TM Racing 125 two-stroke. First, remove the engine guard located at the bottom by unscrewing the fastening screw; then remove the oil drain bolt and let it drain into a container: replace the cap (clean the magnet at the tip first). Once done, replace the cap (the screw) and pour the new engine oil (with the correct specifications) into the designated upper hole, filling to the level (about 600 ml), indicated behind the gear lever.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Tm Racing 125 In this video tutorial, you will learn how to change the engine oil of a TM Racing TM 125 two-stroke. First, remove the plastic cover from the engine…
Tm Racing 125 Today, let's discover the main instructions that will allow us to change the transmission oil of the TM Racing 125 motorcycle. First, we place the mo…
Tm Racing 125 To change the gear oil on a TM Racing 125, you need to loosen the drain plug located at the bottom of the engine block: once this plug is unscrewed, …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos