Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Tm Racing
    3. :
  3. Smr 125
    4. : How to replace the exhaust terminal on TM Racing SMR 125

Model: Tm Racing Smr 125
Part: Muffler
How to replace the exhaust terminal on TM Racing SMR 125

Let's see in this video how to remove the original exhaust terminal, or the silencer, and how to replace it on a TM Racing SMR 125 motorcycle, in simple and quick steps. First of all, let's remove the plastic protection of the original silencer, unscrewing the fixing screws; after which we proceed with the removal of the silencer, unscrewing the screws of the two brackets, as shown in the video. At this point we are going to install the new silencer, adapting the silent blocks to eliminate vibrations; then fix it with the screws and reassemble everything, following the video tutorial to the end!


Posted on 6 February 2024 by ScegliAuto



How do you replace the exhaust of a Tm Racing SMR 125?
Smr 125 In order to replace the exhaust of a Tm Racing SMR 125 you need to loosen the bolts indicated in the video to remove the saddle, which must first be
How do you replace the exhaust pipe on the TM Racing SMR 125?
Smr 125 To replace the exhaust of the TM Racing SMR 125, you need to loosen the screws that fix its end part to the respective supports located on the rear f
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 The procedure for replacing the muffler on the TM Racing SMR 125 involves loosening the bolts that secure the side panel located near the rear fender

How to change the rear wheel of the Piaggio Vespa PX 125 - Lml Star 125

In today's video tutorial we will see the procedure necessary for the disassembly and replacement of the rear wheel of the Piaggio Vespa PX 125, but also of the Lml Star 125 and 150. First we put the central stand and start by removing the left side case; then unscrew the spare wheel screws, using a 13 mm socket wrench. At this point we lift the Vespa on the back to remove the wheel, unscrewing the five nuts; replace the wheel with the new one, fixing it well, finally placing the old wheel on the side case!

Watch the video!


by ScegliAuto

More videos