Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Zx10r
Part: Engine oil

To change the engine oil of a Kawasaki ZX10R, follow these steps. Make sure the engine is warm or slightly hot. Lift the bike safely with a center stand or side stand. Locate the oil drain plug on the engine case, usually located on the bottom side. Place a suitable container under the drain plug. Unscrew the drain plug and let the used oil drain completely. Once drained, securely tighten the drain plug. Next, locate the oil fill cap on the engine housing. Remove the fill cap and slowly add the new oil, using a funnel to prevent spills. Consult the owner's manual for the type and amount of recommended oil. Check the oil level and finally tighten the fill cap, and you will have completed the oil change.

Posted on 4 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Kawasaki ZX10R?
How do you replace the exhaust pipe of the Kawasaki ZX10R?
Zx10r The replacement of the exhaust pipe of the Kawasaki ZX10R can be carried out by loosening the screws that fix the exhaust terminal to its housing, ne…
How to change the engine oil of a Kawasaki ZX10R?
How to change the engine oil of a Kawasaki ZX10R?
Zx10r To change the engine oil of a Kawasaki ZX10R, start by parking the motorcycle on a stable surface and make sure it is securely parked. Wait for the e…
How to Change the Engine Oil in the Kawasaki ZX-10R?
How to Change the Engine Oil in the Kawasaki ZX-10R?
Zx10r In this tutorial, you will see how to change the engine oil in the Kawasaki ZX-10R, an extremely simple and quick operation to perform every 12 month…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos