Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the headlights of the Piaggio MP3 500?

Model: Piaggio Mp3 500
Part: Headlight

Video tutorial

In order to adjust the front headlights of the Piaggio MP3 500, you need to completely detach the panel located at the front of the motorcycle, right in the middle between the front headlights. Once this panel is detached, you will be able to locate the internal screws that correspond to the two optical groups.

By tightening or loosening these screws, you will notice that the beam of light from the optical groups will be respectively raised or lowered. Once the adjustment is complete, you can reposition the front panel that was just removed.


Posted on 4 January 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Piaggio MP3 500 Scooter?
How to Replace the Rear Light Bulbs on a Piaggio MP3 500 Scooter?
Mp3 500 Replacing the rear light bulbs on a Piaggio MP3 500 scooter, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding…
How to Replace the Coolant in a Piaggio MP3 500
How to Replace the Coolant in a Piaggio MP3 500
Mp3 500 This guide will show you the steps to replace the coolant in your Piaggio MP3 500 scooter. First, place the scooter on its centre stand and begin uns…
How to Replace the Transmission on the Piaggio MP3 500?
How to Replace the Transmission on the Piaggio MP3 500?
Mp3 500 To replace the transmission on the Piaggio MP3 500, loosen the bolts securing the cover located on the left side of the scooter, near the rear wheel.…

How to Change the Engine Oil in the Suzuki GSX-S1000?

Changing the engine oil in the Suzuki GSX-S1000, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath and remove the lower fairing. Next, locate the drain hole bolt, unscrew it using a socket spanner, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos