|
Do it yourself
| |||
| ||||
How to Replace the Coolant in a Piaggio MP3 500
Model: Piaggio Mp3 500
Video tutorial
This guide will show you the steps to replace the coolant in your Piaggio MP3 500 scooter. First, place the scooter on its centre stand and begin unscrewing the drain screw located on the water pump cover; allow the fluid to drain into a container for about ten minutes. Next, remove the plastic cover under the instrument panel and unscrew the radiator cap. Refill with new antifreeze until you reach the maximum level mark!
Updated on 16 August 2026 by ScegliAuto
Related tutorials
Mp3 500
In this article we will see how to top up the coolant of the Piaggio MP3. To perform this procedure you will need a Phillips screwdriver. To check th…
Mp3 500
In this brief guide, we will see how to reset the maintenance light for the Piaggio MP3 500. Note that the following procedure is also valid for the …
Mp3 500
This guide provides the necessary instructions for replacing the gearbox oil of the Piaggio Mp3 500 scooter. First, place the scooter on its central …
|
How to Replace the Air Filter on the Royal Enfield Meteor 350
To replace the air filter on the Royal Enfield Meteor 350, loosen the bolts securing the side cover on the left side of the bike. Once these bolts are loosened, remove the cover to access the filter underneath. The filter can be removed from its housing by disconnecting its securing bolts and replacing it with a new spare part. After inserting the new filter, secure it in place with the bolts and reinstall the removed cover. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
