Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on a TM Racing SMR 125, loosen the bolts securing the side panel next to the rear mudguard. Once the panel is removed, you can loosen the two screws holding the exhaust at both the front and rear ends. After removing the old exhaust, connect the new one at the front of the exhaust pipe and secure the rear end with the appropriate bolt. After installing the new exhaust, refit the side panel with the screws.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Smr 125 To replace the exhaust on a Tm Racing SMR 125, you need to loosen the bolts indicated in the video to remove the seat, which must first be pulled bac…
Smr 125 To replace the exhaust on a TM Racing SMR 125, you will need to loosen the screws that secure the exhaust end can to its housing: before doing this, …
Smr 125 To replace the exhaust on the TM Racing SMR 125, loosen the screws that secure its end to the supports on the rear mudguard of the bike. Once these s…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos