|
Do it yourself
| |||
| ||||
|
Model: Tm Racing Smr 125
To replace the exhaust on the TM Racing SMR 125, loosen the bolts securing the side panel next to the rear mudguard. Once the panel is removed, you can loosen the two screws that secure the exhaust at both the beginning and the end of its housing. When the old exhaust is removed, connect the new one at the start of the exhaust pipe and secure its end with the appropriate bolt. After installing the new exhaust, refit the side panel in its place.
Updated on 26 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Smr 125
To replace the exhaust on a TM Racing SMR 125, you will need to loosen the screws that secure the exhaust end can to its housing: before doing this, …
Smr 125
The muffler of the TM Racing SMR 125 can be replaced by loosening the screws that secure the exhaust terminal to its housing, located on the right si…
Smr 125
It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |