Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The muffler of the TM Racing SMR 125 can be replaced by loosening the screws that secure the exhaust terminal to its housing, located on the right side of the rear fender of the motorcycle: to access the muffler, you will need to loosen the screws that secure the side panel on the right side of the motorcycle. Once the panel has been removed, you can proceed by loosening the screws that secure the muffler and the connecting clamp between the muffler and the manifold. At this point, you can insert the new replacement piece to verify that everything is functioning properly.

Posted on 24 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a TM Racing SMR 125?
How to Replace the Exhaust on a TM Racing SMR 125?
Smr 125 To replace the exhaust on a TM Racing SMR 125, you will need to loosen the screws that secure the exhaust end can to its housing: before doing this, …
How do you replace the exhaust pipe of the TM Racing SMR 125?
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…
How do you replace the exhaust pipe of the TM Racing SMR 125?
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 To replace the exhaust pipe of the TM Racing SMR 125, you need to loosen the screws that hold the side panel on the right side of the motorcycle: onc…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos