|
Do it yourself
| |||
| ||||
|
Model: Tm Racing Smr 125
To replace the exhaust pipe of the TM Racing SMR 125, you need to loosen the screws that hold the side panel on the right side of the motorcycle: once the panel is removed, you can proceed by loosening the screw of the support and widening the clamp between the exhaust and the collector. Once the old exhaust pipe is removed, you can then position the new one: this can be covered by the panel and properly secured to its housing, making sure it functions correctly.
Posted on 29 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Smr 125
It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…
Smr 125
The muffler of the TM Racing SMR 125 can be replaced by loosening the screws that secure the exhaust terminal to its housing, located on the right si…
Smr 125
To replace the exhaust on the TM Racing SMR 125, loosen the screws that secure its end to the supports on the rear mudguard of the bike. Once these s…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |