Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The exhaust installed on the TM Racing SMR 125 can be replaced by loosening the bolts that secure the side panel located near the rear fender. Once this panel has been removed, you can unscrew the two screws that hold the exhaust in place, at the beginning and at the end of its housing. When the old exhaust has been detached, you can connect the new one to the beginning of the exhaust pipe and secure its end with the appropriate bolt. After installing the new exhaust, you can reattach the side panel to its housing.

Posted on 23 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a TM Racing SMR 125?
How to Replace the Exhaust on a TM Racing SMR 125?
Smr 125 To replace the exhaust on a TM Racing SMR 125, you will need to loosen the screws that secure the exhaust end can to its housing: before doing this, …
How do you replace the exhaust pipe of the TM Racing SMR 125?
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 The muffler of the TM Racing SMR 125 can be replaced by loosening the screws that secure the exhaust terminal to its housing, located on the right si…
How do you replace the exhaust pipe of the TM Racing SMR 125?
How do you replace the exhaust pipe of the TM Racing SMR 125?
Smr 125 It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos