|
Do it yourself
| |||
| ||||
|
Model: Tm Racing Smr 125
On the TM Racing SMR 125, you can replace the exhaust by loosening the bolts that secure the side panel near the rear mudguard. Once the side panel is removed, unscrew the two screws that hold the exhaust in place at the front and rear of its housing. When the old exhaust is removed, connect the new one to the front of the collector and secure its rear with the appropriate bolt. After installing the new exhaust, refit the protective side panel.
Posted on 15 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Smr 125
To replace the exhaust on a TM Racing SMR 125, you will need to loosen the screws that secure the exhaust end can to its housing: before doing this, …
Smr 125
The muffler of the TM Racing SMR 125 can be replaced by loosening the screws that secure the exhaust terminal to its housing, located on the right si…
Smr 125
It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…
|
How to Replace the Battery of the Kymco Agility 125?
To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |