Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Tm Racing Mx 250
Part: Engine

In order to disassemble the engine of the TM Racing MX 250, you need to remove it from its housing compartment by unscrewing the screws that hold it in place in the center of the frame: you will also need to loosen the screws that hold the exhaust pipes and disconnect the connectors. At this point, it will be possible to proceed by loosening the screws that hold the cylinder, removing it and accessing the piston contained inside: in this way it will be possible to identify the additional internal components and replace them if necessary. The engine can then be closed by reinstalling it in its housing.

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the TM Racing MX 250?
How do you replace the exhaust pipe of the TM Racing MX 250?
Mx 250 In order to replace the exhaust pipe of the TM Racing MX 250, you need to loosen the screws that secure the panel located on the side of the motorcyc…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos