Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Alphard Vellfire - Key

Toyota Alphard Vellfire (2015-2023 / MK 3)
How to replace the battery of the Toyota Alphard remote control?
Replacing the battery of the Toyota Alphard remote control is a very simple and inexpensive operation, let's see how to proceed in this tutorial. To do this, …read all…
Posted on 29 June 2023 by ScegliAuto
Toyota Alphard Vellfire (2015-2023 / MK 3)
How to replace the Toyota Alphard 3 remote key battery
If the smart key of your Honda Alphard third series (year 2015-2022) has suddenly stopped working, it means that the button battery inside it is now completely …read all…
Posted on 19 November 2022 by ScegliAuto
Toyota Alphard Vellfire (2015-2023 / MK 3)
How to replace the remote control battery of Toyota Alphard Vellfire Mk3
The guide shows how to replace the remote control battery of the Toyota Alphard Vellfire Mk3. The first operation to perform is to remove the physical key by …read all…
Posted on 22 September 2022 by ScegliAuto
Toyota Alphard Vellfire (2015-2023 / MK 3)
How to replace the battery of the Toyota Alphard remote control?
In this tutorial we can see how to replace the battery of the Toyota Alphard remote control, a very simple and quick operation. To do this, we will only need a …read all…
Posted on 30 April 2024 by ScegliAuto
Car stereo (1) Key (4) V-belt (2) Checks and maintenance (2) Dashboard (1) Air filter (1) Cabin air filter (2) Oil filter (2) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Fuse box (1) Seat (2) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos