Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Alphard Vellfire
    4. : Instrument cluster

Toyota Alphard Vellfire - Instrument cluster

Toyota Alphard Vellfire (2015-2023 / MK 3)
How to manually reset the dashboard of the Toyota Alphard Vellfire.
In this new mini guide dedicated to your Toyota Alphard Vellfire Mk3, we will discover how to manually reset the instrument cluster. It is a very simple and …read all…
Posted on 30 May 2023 by ScegliAuto
Toyota Alphard Vellfire (2008-2015 / MK 2)
How to install a USB port on Toyota Alphard Vellfire
To install and add a USB port on a Toyota Alphalrd Vellfire, let's start by getting the module, which we can find on Amazon for less than 10.00 euros. Then, …read all…
Posted on 13 December 2022 by ScegliAuto
Toyota Alphard Vellfire (2008-2015 / MK 2)
How to adjust the time of the Toyota Alphard
To change the time of the Toyota Alphard, we go to the dashboard of the air conditioning; at the bottom of where the air conditioner temperature is adjusted, …read all…
Posted on 6 June 2022 by ScegliAuto
Car stereo (1) Key (4) V-belt (2) Checks and maintenance (2) Dashboard (1) Air filter (1) Cabin air filter (2) Oil filter (2) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Fuse box (1) Seat (2) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos