Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Alphard Vellfire
    4. : How to install a USB port on Toyota Alphard Vellfire

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 2 - Years 2008-2015
Part: Instrument cluster
Operation: How to install a USB port on Toyota Alphard Vellfire

To install and add a USB port on a Toyota Alphalrd Vellfire, let's start by getting the module, which we can find on Amazon for less than 10.00 euros. Then, with the use and maintenance manual of the car, we can see from the free keys that are on the dashboard, which could be the one available for the use we want to make of them. At this point we disassemble the front mask of the system and strip the various pins. We remove the chosen empty key, and put in its place the new one we want to install. We will connect the electrical connector to the fuse box with a new fuse (of which we will have determined the position available through the use and maintenance booklet) and a plug to which we will connect the cables coming from the new USB port. all the cables are hidden and it is as if the car was born with this device.


Posted on 13 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos