Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Alphard Vellfire
  6. : How to change the USB slot on Toyota Alphard Vellfire.

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: Dashboard
Operation: How to change the USB slot on Toyota Alphard Vellfire.

In this video, we show you how to change the USB slot on a Toyota Alphard Vellfire. After ordering the part, which consists of two USB ports and a cigarette lighter, release the pressure panel using a screwdriver. Press the 4 buttons that hold the slot in place and remove it from its housing by pushing it outwards. Insert the new slot into the housing, being careful of the mounting direction. As shown in the video, remove the box containing the cables and connectors and bring the free cable to the slot. Attach the two connectors and the remaining ones, and reposition the panel in its place.


Posted on 20 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos