Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Alphard Vellfire
    4. : How to replace the V-belt of the Toyota Alphard Vellfire 3.5L

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: V-belt
Operation: How to replace the V-belt of the Toyota Alphard Vellfire 3.5L

Let's see in this short guide the main steps that will allow us to disassemble and replace the serpentine belt of the Toyota Alphard Vellfire 3.5L. First of all we lift the car and remove the right front wheel; after which we also remove the front wheel arch, in order to access our serpentine belt, as shown in the video. At this point we are going to loosen the belt tensioner, using a star wrench, in order to remove and replace the belt with the new one; then insert it correctly between the various pulleys and reassemble everything!


Posted on 15 May 2024 by ScegliAuto



Guide to replacing the serpentine belt tensioner on the Toyota Alphard Vellfire 3.5L V6.
Toyota Alphard Vellfire (2015-2023 / MK 3) Let's see, in this short and simple guide, the main instructions that will allow us to disassemble and replace the serpentine belt tensioner of the T
How to change the language of the Toyota Alphard Vellfire instrumentation
Toyota Alphard Vellfire (2015-2023 / MK 3) Let's find out in this short and simple guide the steps that will allow us to change the language of the controls of the instrumentation and multimed
How to remove the central seats of the Toyota Alphard Vellfire
Toyota Alphard Vellfire (2015-2023 / MK 3) In today's video tutorial we will see how to remove, in simple and quick steps, the central seats of the Toyota Alphard Vellfire. First of all we ope

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos