Do it yourself
Frequently asked questions about cars and motorcycles

Toyota Alphard Vellfire - V-belt

Toyota Alphard Vellfire (2015-2023 / MK 3)
Guide to replacing the serpentine belt tensioner on the Toyota Alphard Vellfire 3.5L V6.

Let's see, in this short and simple guide, the main instructions that will allow us to disassemble and replace the serpentine belt tensioner of the Toyota …read all…
Posted on 19 April 2023 by ScegliAuto
Toyota Alphard Vellfire (2015-2023 / MK 3)
How to replace the V-belt of the Toyota Alphard Vellfire 3.5L

Let's see in this short guide the main steps that will allow us to disassemble and replace the serpentine belt of the Toyota Alphard Vellfire 3.5L. First of …read all…
Posted on 15 May 2024 by ScegliAuto

Car stereo (1) Key (4) V-belt (2) Checks and maintenance (2) Dashboard (1) Air filter (1) Cabin air filter (2) Oil filter (2) Engine oil (1) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Fuse box (1) Seat (2) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos