Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Camry
    4. : Drivetrain

Toyota Camry - Drivetrain

Drivetrain Toyota Camry (2011-2019 / xv 50)

Toyota Camry (2011-2019 / Xv50)
How to reset the automatic transmission of the Toyota Camry
In this guide we will see the instructions that will allow us to reset the automatic transmission of the Toyota Camry. In order to reset the automatic …Read all…
Posted on 22 August 2025 by ScegliAuto
Cigarette lighter (1) Airbag (4) Alternator (2) Speaker (2) Antenna (1) Car stereo (6) Battery (12) Transmission (1) Spark plugs (1) Body (3) Control unit (1) Key (18) Timing belt (3) V-belt (3) Onboard computer (3) Checks and maintenance (29) Dashboard (2) MAF sensor (1) Rear bench seat (5) Headlight (8) Tail light (2) Air filter (9) Cabin air filter (9) Oil filter (2) Light bulb (2) Side marker bulb (1) Headlight bulb (10) Tail light bulb (4) Antifreeze coolant (1) Instrument panel light (1) License plate light (1) Handle (3) Power window motor (2) Starter motor (3) Engine oil (10) Clock (21) Door trim panel (3) Front bumper (5) Rear bumper (3) Shift knob (3) Pump (1) Fuel pump (7) Car door (1) Instrument cluster (1) Wheel (2) Fuse box (24) Seat (7) Parking sensors (1) Door lock (2) Side mirror (8) Rearview mirror (1) Warning light – error code (25) (42) Tire pressure warning light (12) Service warning light (58) Engine mount (1) Fuel cap (2) Windshield wipers (2) Thermostat (1) Drivetrain (1) EGR valve (1) Blower motor (1) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos