Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Camry
    4. : Rear bumper

Toyota Camry - Rear bumper

Toyota Camry (2011-2019 / Xv50)
Rear bumper repair of a 2011 Toyota Camry
The video shows how to repair the rear bumper of a 2011 Toyota Camry that has been moved after a slight blow. It is a very simple operation that can be done in …read all…
Posted on 10 July 2022 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (1) Car stereo (4) Battery (9) Spark plugs (1) Control unit (1) Key (14) Timing belt (1) V-belt (2) -board computer (14) Checks and maintenance (49) Dashboard (2) Rear bench seat (4) Headlight (4) Tail light (1) Air filter (8) Cabin air filter (9) Oil filter (1) Light bulb (2) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (2) Antifreeze liquid (1) Dashboard light (1) License plate light (1) Handle (3) Window motor (1) Starter motor (2) Engine oil (10) Door panel (2) Front bumper (5) Rear bumper (1) Tires (5) Pump (1) Fuel pump (4) Instrument cluster (20) Wheel (1) Fuse box (12) Seat (6) Parking sensors (1) Outside rearview mirror (3) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Transmission (1) EGR valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos