Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper on the Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial we can see how to remove the rear bumper on the Toyota Camry, an extremely simple and quick operation. First of all, we open the trunk door, then we remove the two indicated plastic caps and unscrew the bolts just released with a 10mm socket wrench.

We then unscrew the two bolts accessible from inside the wheel arches, continue with the bolts along the lower edge of the bumper and remove the various plastic rivets. At this point, all that's left is to separate the bumper from the frame and install the replacement if necessary following the reverse procedure.


Posted on 1 November 2025 by ScegliAuto


Related tutorials

Disassembly of the rear bumper of the Toyota Camry
Disassembly of the rear bumper of the Toyota Camry
Toyota Camry (2011-2019 / Xv50) Following these brief and simple steps, we will see how to disassemble and eventually replace the rear bumper of the Toyota Camry. First, open the re…
How to Remove the Front Bumper of the Toyota Camry XV40
How to Remove the Front Bumper of the Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) Let's discover the step-by-step instructions for removing the front bumper of the Toyota Camry XV40 in simple steps. First, unscrew the mounting scre…
How to Remove the Front Bumper of the Toyota Camry?
How to Remove the Front Bumper of the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) To replace the front bumper of the Toyota Camry, open the hood to access the screws located at the front that secure the bumper at the top. Once thes…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos