Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the wheel of a Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

To remove the wheel of a Toyota Camry, start by parking the car on a flat and safe surface, making sure to engage the parking brake. Before lifting the vehicle, slightly loosen the wheel nuts using a cross wrench or a ratchet wrench.

Then, place the jack under the correct lifting point, usually indicated in the car manual, and lift the car until the wheel is off the ground. Once the wheel is lifted, completely remove the nuts and remove the wheel from the hub. If the wheel is stuck, tap the back of the wheel lightly with a rubber mallet to free it. To reassemble the wheel, follow these steps in reverse order, hand tightening the nuts before lowering the vehicle and finally tightening them to the ground.


Posted on 12 March 2025 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on the Toyota Camry XV40
Where to Find the Fuse Box on the Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) If you own a Toyota Camry XV40 (model year 2006-2013) and want to find the fuse box, just follow these steps. First, get inside the vehicle and reach…
How to Disassemble the Steering Wheel Airbag from a Toyota Camry
How to Disassemble the Steering Wheel Airbag from a Toyota Camry
Toyota Camry (2018-2024 / Xv70) In this short and simple guide, you will learn the procedure for disassembling and replacing the steering wheel airbag in a Toyota Camry. First, get …
How to Remove the Steering Wheel Airbag from a Toyota Camry
How to Remove the Steering Wheel Airbag from a Toyota Camry
Toyota Camry (1997-2001 / Xv20) Today, let's go through the steps to remove and replace the steering wheel airbag in a Toyota Camry. First, open the hood of the vehicle and disconne…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos