Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from a Toyota Camry

Model: Toyota Camry Xv20 - Years: 1997, 1998, 1999, 2000, 2001
Part: Airbag

See other generations:
Video tutorial

Today, let's go through the steps to remove and replace the steering wheel airbag in a Toyota Camry. First, open the hood of the vehicle and disconnect both battery terminals (positive and negative).

Next, remove the two plastic covers located behind the steering wheel by unscrewing the mounting screws to detach and remove them (disconnecting the electrical connector), as shown in the video. This will allow you to take off and replace the steering wheel if necessary by unscrewing its center screw.

Then, install the new airbag!


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Disassemble the Steering Wheel Airbag from a Toyota Camry
How to Disassemble the Steering Wheel Airbag from a Toyota Camry
Toyota Camry (2018-2024 / Xv70) In this short and simple guide, you will learn the procedure for disassembling and replacing the steering wheel airbag in a Toyota Camry. First, get …
How to Remove the Steering Wheel Airbag from a Toyota Camry?
How to Remove the Steering Wheel Airbag from a Toyota Camry?
Toyota Camry (1997-2001 / Xv20) To remove the steering wheel airbag from a Toyota Camry, use a screwdriver to pry open the rear side of the steering wheel on both the right and left…
How to Remove the Steering Wheel Airbag in a Toyota Camry?
How to Remove the Steering Wheel Airbag in a Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this tutorial, you will see how to remove the steering wheel airbag in a Toyota Camry, a very simple and quick operation. Before proceeding, open …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos