Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the steering wheel airbag in the Toyota Camry?

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Airbag

In this tutorial we can see how to disassemble the steering wheel airbag in the Toyota Camry, a very simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery, in order to avoid accidental activation of the airbag itself. Once this is done, go inside the car, then, using a small screwdriver with a flat tip, unlock the two doors on the sides of the steering column. Then unhook the fastening clips of the airbag, separate it from the steering wheel, and disconnect the power connector.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Camry (2018-2024 / Xv70) In this short and simple guide, we will see the process of disassembling and replacing the steering wheel airbag of the Toyota Camry. First, we get i…
Toyota Camry (1997-2001 / Xv20) To remove the steering wheel airbag from a Toyota Camry, use a screwdriver to pry open the rear side of the steering wheel on both the right and left…
Toyota Camry (1997-2001 / Xv20) Today we will see the instructions that will allow us to disassemble and replace the steering wheel airbag of the Toyota Camry, in simple steps. Firs…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos