Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Camry - Seat

Toyota Camry (2011-2019 / Xv50)
How to remove the driver's seat in the Toyota Camry Hybrid?
In this tutorial, we can see how to disassemble the driver's seat in the Toyota Camry Hybrid, a very simple and quick operation. First of all, we open the …read all…
Posted on 16 April 2024 by ScegliAuto
Toyota Camry (2018-2024 / Xv70)
How to fold down the rear seats in the Toyota Camry?
In this tutorial, we can see how to fold down the rear seats in the Toyota Camry, an extremely simple and quick operation to be carried out in case we need …read all…
Posted on 20 March 2024 by ScegliAuto
Toyota Camry (2002-2006 / Xv30)
How to remove the rear seats of the Toyota Camry.
Below we will see the main instructions that will allow us to disassemble and replace the rear seats of the Toyota Camry. First, we open the rear doors and …read all…
Posted on 11 September 2023 by ScegliAuto
Toyota Camry (2006-2013 / Xv40)
How do you remove the rear seats of the Toyota Camry?
In order to remove the rear seats of the Toyota Camry, you need to disconnect the two fastening clips located at the bottom of the seat, one on the driver's …read all…
Posted on 16 August 2023 by ScegliAuto
Toyota Camry (1991-1996 / Xv10)
How to remove the rear seats of a first series Toyota Camry
In this video we will see how to perform a rear seat removal for a first production series Toyota Camry. As a first step, force with both hands and lift the …read all…
Posted on 5 September 2022 by ScegliAuto
Toyota Camry (2006-2013 / Xv40)
How to remove the rear seats of the Toyota Camry Xv40
In this video we will see how to remove the rear seats of the Toyota Camry Xv40, from 2006 to 2011, by following the instructions below. First of all, we open …read all…
Posted on 27 March 2024 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (1) Car stereo (4) Battery (9) Spark plugs (1) Control unit (1) Key (14) Timing belt (1) V-belt (2) -board computer (14) Checks and maintenance (49) Dashboard (2) Rear bench seat (4) Headlight (4) Tail light (1) Air filter (8) Cabin air filter (9) Oil filter (1) Light bulb (2) Side turn signal light bulb (1) Headlight bulb (5) Rear light bulb (2) Antifreeze liquid (1) Dashboard light (1) License plate light (1) Handle (3) Window motor (1) Starter motor (2) Engine oil (10) Door panel (2) Front bumper (5) Rear bumper (1) Tires (5) Pump (1) Fuel pump (4) Instrument cluster (20) Wheel (1) Fuse box (12) Seat (6) Parking sensors (1) Outside rearview mirror (3) Interior rearview mirror (1) Engine mount (1) Windscreen wipers (2) Transmission (1) EGR valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos