Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Camry
    4. : How to remove the driver's seat in the Toyota Camry Hybrid?

Toyota Camry - Video tutorial

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Seat
Operation: How to remove the driver's seat in the Toyota Camry Hybrid?

In this tutorial, we can see how to disassemble the driver's seat in the Toyota Camry Hybrid, a very simple and quick operation. First of all, we open the hood, then disconnect the negative terminal of the battery to avoid accidental activation of the airbags. Next, we open the driver's door, move the seat back, and, using a 14mm socket wrench, unscrew the two front fixing bolts. Finally, we move the seat forward, remove the indicated covers, and unscrew the remaining two bolts. At this point, we can disconnect the indicated yellow connector and remove the seat from the cabin.


Posted on 16 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Camry 2002-2006 - What are the problems with the driver's seat of the Toyota Camry? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos