Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of a First Generation Toyota Camry

Model: Toyota Camry Xv10 - Years 1991-1996
Part: Seat

In this video, you will learn how to remove the rear seat from a first generation Toyota Camry. First, apply force with both hands and lift the seat to disengage it from its position. By doing this, you will detach the seat from its mounting pins so you can pull it out. Next, remove the 2 bolts now visible at the ends using a 12 mm wrench. Remove the side seat panels by pulling them upward, NOT outward. This way, you will be able to take off all the protective and attachment plastics of the seat.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of the Toyota Camry
How to Remove the Rear Seats of the Toyota Camry
Toyota Camry (2002-2006 / Xv30) Below are the main instructions to remove and replace the rear seats of the Toyota Camry. First, open the rear doors and start unfastening and removi…
How to disassemble the rear seat bench of the Toyota Camry
How to disassemble the rear seat bench of the Toyota Camry
Toyota Camry (2011-2019 / Xv50) In a few simple steps, we will see how to disassemble the rear seat of the Toyota Camry. First of all, we open the rear doors of the car and start li…
How to Replace the Rear Seats in a Toyota Camry?
How to Replace the Rear Seats in a Toyota Camry?
Toyota Camry (2002-2006 / Xv30) As you can see in this tutorial, removing the rear seats in a Toyota Camry is an extremely simple and quick task. First, open both rear doors. Then, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos