Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Sequoia
    4. : Brake discs

Toyota Sequoia - Brake discs

Toyota Sequoia (2001-2007 / Xk30, Xk40)
How to change brake discs and front brake pads on Toyota Sequoia
To replace the Toyota Sequoia brake discs and pads, we lift the car, remove the wheel on one side, place a push pin at the rear of the upper pad pin and tap it …read all…
Posted on 12 May 2023 by ScegliAuto
Battery (1) Spark plugs (1) Wheel rim (1) Key (2) -board computer (1) Checks and maintenance (1) Brake discs (1) Headlight (1) Tail light (1) Cabin air filter (1) Accessory Kit (1) Handle (1) Door (1) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos