Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the external rearview mirror of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

This brief guide will show us how to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of the car and start to disassemble and remove the door panel, unscrewing all the fixing screws; then we disconnect the electrical connector for the mirror adjustment, then unscrew its fixing screws to remove it from the outside, as shown in the video.

At this point, we carry out the repair or replacement of the rearview mirror, finally reassembling all the components.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

Guide to replacing the external rearview mirror of the Toyota Yaris
Guide to replacing the external rearview mirror of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below we will see the necessary steps to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of t…
How to Replace the Glass of the Wing Mirror on the Toyota Yaris?
How to Replace the Glass of the Wing Mirror on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the glass of the wing mirror on the Toyota Yaris, lever with an object at the bottom of the glass: once this operation is complete, you ca…
How to replace the turn signal bulb of the Toyota Yaris side mirror
How to replace the turn signal bulb of the Toyota Yaris side mirror
Toyota Yaris (2020-2026 / MK 4) In this guide, we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the Toyota Yaris side mirror. First…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos