Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the external rearview mirror of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

Below we will see the necessary steps to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of the car and start unscrewing all the screws fixing the door panel, then also removing the window switch panel (disconnecting the electrical connector located underneath); once the lining is removed, we will unscrew the screws of the mirror, disconnecting the electrical connector to remove it from the outside, as shown in the video.

We replace and install the new rearview mirror, finally adjusting the glass!


Posted on 13 August 2025 by ScegliAuto


Related tutorials

Replacement of the external rearview mirror of the Toyota Yaris
Replacement of the external rearview mirror of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This brief guide will show us how to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of the c…
How to Replace the External Wing Mirror of a Toyota Yaris
How to Replace the External Wing Mirror of a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How to replace the external wing mirror of a Toyota Yaris? Remove the door panel (there are screws underneath to remove) and the internal cover of th…
How to replace the external rearview mirror of the Toyota Yaris
How to replace the external rearview mirror of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's steps will allow us to disassemble and replace the external rearview mirror of the Toyota Yaris. First, we open the front door of the car and…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos