Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the fluid levels of the 2016 Toyota Yaris.

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Checks and maintenance

As explained in previous video tutorials, checking the fluids of a vehicle is very important for our safety and for the proper functioning of the vehicle. Today we will explain how to check the level of antifreeze and windshield washer fluid in the 2016 Toyota Yaris. To check the level of both fluids, simply look at the two reference lines between MAX and MIN. Since both tanks are transparent, the action is much simpler. If the levels are below the MIN, it is necessary to open the tank cap and top up the fluids inside.

Posted on 29 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Coolant on the Toyota Yaris?
How to Top Up the Coolant on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) If you intend to check and monitor the fluid levels in your vehicle, particularly the coolant, follow the instructions provided here and refer to the…
How to Check the Oil Level in the Toyota Yaris?
How to Check the Oil Level in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) Checking the oil level in the Toyota Yaris is a very simple operation. First, wait at least 5 minutes after turning off the engine before proceeding.…
Oil Level Check and Top-Up
Toyota Yaris (2011-2019 / Xp130) It is good practice to check the engine oil level every 1,000/1,500 miles. This check should be done when the engine is cold, or if you have just tur…

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos