Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Oil Level in the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

Checking the oil level in the Toyota Yaris is a very simple operation. First, wait at least 5 minutes after turning off the engine before proceeding.

Then, locate the yellow ring at the top of the engine. Grasp the ring and fully extract the dipstick, clean it with absorbent paper, reinsert it into the hole, and pull it out again.

If the indicated level is between the two marks, no further action is needed. Otherwise, if it is too low, unscrew the cap and add the necessary oil to reach the optimal level.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Oil Level Check and Top-Up
Toyota Yaris (2011-2019 / Xp130) It is good practice to check the engine oil level every 1,000/1,500 miles. This check should be done when the engine is cold, or if you have just tur…
How to check the fluid levels of the 2016 Toyota Yaris.
How to check the fluid levels of the 2016 Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) As explained in previous video tutorials, checking the fluids of a vehicle is very important for our safety and for the proper functioning of the veh…
How to Change the Engine Oil on a Toyota Yaris Hybrid
How to Change the Engine Oil on a Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) In this video tutorial, you will see how to change the engine oil on a Toyota Yaris Hybrid by following a few simple steps: for this engine, use 0W20…

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos