|
Do it yourself
| |||
| ||||
Oil Level Check and Top-Up
Model: Toyota Yaris
Xp130
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
This video is currently unavailable
It is good practice to check the engine oil level every 1,000/1,500 miles. This check should be done when the engine is cold, or if you have just turned off the engine, it is advisable to wait a few minutes to allow the circulating oil to settle in the sump for a more accurate measurement. To check the oil level, open the bonnet and extract the dipstick, which is highlighted by a coloured ring handle. Remove the dipstick, clean it, and reinsert it into its place. Extract the dipstick again and check that the oil level is between the maximum and minimum level marks. If the level is at the minimum, you can add oil by opening the cap on the sump. Only add oil specific to the type of engine according to the manufacturer's instructions. After topping up the oil, check the level again. Generally, oil should be changed every 8,000 miles or six months. While checking the oil level, also observe its colour and consistency. If it is black and too fluid, it is probably time to change it. Car model: Toyota Yaris Required tools: no special tools are necessary.
Updated on 23 February 2026 by ScegliAuto
Related tutorials
Toyota Yaris
(1999-2005 /
Xp10)
Gear oil is certainly one of the most neglected components by motorists (and sometimes even by mechanics) because checking the level is quite complic…
Toyota Yaris
(2005-2011 /
Xp90)
Checking the oil level in the Toyota Yaris is a very simple operation. First, wait at least 5 minutes after turning off the engine before proceeding.…
Toyota Yaris
(2005-2011 /
Xp90)
Changing the engine oil and its filter is a maintenance task that can easily be done yourself, provided you dispose of the used oil and filter proper…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |