|
Do it yourself
| |||
| ||||
Gear Oil Replacement Instructions
Model: Toyota Yaris
Xp10
- Years 1999-2005
Gear oil is certainly one of the most neglected components by motorists (and sometimes even by mechanics) because checking the level is quite complicated, leading it to be forgotten. However, gear oil is a very important component for maintaining the efficiency of the car's transmission. From the perspective of routine maintenance for manual gearboxes, manufacturers tend not to require replacement, only checking and restoring the level (generally every 4 years under normal driving conditions). Replacement of the gear oil is only anticipated when, during a check, the mechanic deems it necessary. The fact that replacement is no longer anticipated reflects the improvement in the quality of transmission oils. On the other hand, unlike engine oil, gear oil is not subjected to carbon residues from combustion that can contaminate it, allowing it to last longer. In any case, replacing the gear oil is simple and economical as it generally requires just over a kilogram: drain the oil through the lower plug and then fill the gearbox with new oil through the rear plug until the oil starts to overflow.
Updated on 17 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Yaris
(2005-2011 /
Xp90)
The gearbox oil also requires periodic replacement. If you experience gear engagement problems, it is advisable to replace the oil as soon as possibl…
Toyota Yaris
(2005-2011 /
Xp90)
Let's see how to change the gearbox oil on a Toyota Yaris. Position the car on a column lift and raise it to a comfortable height for disassembly. To…
Toyota Yaris
(1999-2005 /
Xp10)
If you have a worn gear knob and want to replace it, here’s how to do it. Unscrew the worn knob from the top of the gear stick (if you have difficult…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.220
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |