Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Filter on a Toyota Yaris 1.0

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

Changing the engine oil and its filter is a maintenance task that can easily be done yourself, provided you dispose of the used oil and filter properly; position the car on suitable ramps to facilitate access to the oil sump and unscrew the drain plug located on the side to drain the used oil; the filter is located in front of the sump and can be unscrewed with a socket or strap wrench; then screw the plug back into the sump and install the new filter, lubricating the gasket with a bit of clean oil; finally, fill the engine with 3.7 litres of new oil.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Toyota Yaris
How to Replace the Oil Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How do you replace the oil filter on a Toyota Yaris? Lift the car on a column lift and drain the used oil from the engine, then move on to removing t…
How to change the oil and oil filter on a Toyota Yaris?
How to change the oil and oil filter on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanne…
Engine Oil Change for Toyota Yaris 1.3 VVT-i
Engine Oil Change for Toyota Yaris 1.3 VVT-i
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will learn how to remove and replace the engine oil in a Toyota Yaris 1.3 VVT-i. First, lift the vehicle and remove the oil dra…

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos