Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on a Toyota Yaris Hybrid

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, you will see how to change the engine oil on a Toyota Yaris Hybrid by following a few simple steps: for this engine, use 0W20 oil or 5W30, which is best for engine longevity; while 0W20 is better for fuel efficiency due to its lower viscosity.

To change the engine oil, the first thing you need to do is lift the car with a hydraulic jack and safety supports (axle stands).

Place an oil catch pan under the oil sump and unscrew the oil cap; then wait for all the engine oil to drain out and replace the cap, screwing it on tightly. Unscrew the oil filter and replace it with a new one. Now lift the bonnet and top up the engine oil (about 4 litres).

Lower your car and check the engine oil level.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2020-2026 / MK 4) The service light, illuminated and shaped like a spanner, can be found on the instrument panel of all vehicles, including the 2020 Toyota Yaris Hybri…
Toyota Yaris (2020-2026 / MK 4) Starting a Toyota Yaris Hybrid with a flat battery is simple, but different from a traditional car. You do not need to look for the 12-volt battery u…
Toyota Yaris (2020-2026 / MK 4) The Toyota Yaris Hybrid features a petrol engine and an electric motor that recharges by recovering energy from braking or via the alternator. When t…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos