Do it yourself
Frequently asked questions about cars and motorcycles

How to Start a Toyota Yaris Hybrid with a Flat Battery

Model: Toyota Yaris MK 4 - Years 2020-2026
Part: Battery

Starting a Toyota Yaris Hybrid with a flat battery is simple, but different from a traditional car. You do not need to look for the 12-volt battery under the rear seat. Toyota technicians have designed a dedicated connection point under the bonnet for this situation. Park the second car close to the Yaris, ensuring the two vehicles do not touch. Open the bonnet of the Yaris Hybrid and locate the fuse box (on the right side). Lift the plastic cover and underneath you will find the positive terminal, exclusive for emergency starting. Connect the positive cable to the Yaris and positive on the donor vehicle, then the negative cable to the donor and the negative of the Yaris to an unpainted earth point: usually, a bolt is left for this purpose. Start the donor vehicle, then your Yaris and keep the engine running. Disconnect the cables in reverse order.

Posted on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2020-2026 / MK 4) In this video we can see how to start a Toyota Yaris Hybrid with a dead starter battery. It doesn't work like cars with an internal combustion engine…
Toyota Yaris (2020-2026 / MK 4) In this video, we show you what to do when the remote battery of the Toyota Yaris Hybrid is flat. First, when the remote battery is flat and you cann…
Toyota Yaris (2020-2026 / MK 4) In this video we can see how to start a Toyota Yaris Hybrid with a dead battery: with the dead battery, even the remote control doesn't work, so we w…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - How much does it cost to replace the Toyota Yaris Hybrid battery? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos