Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Toyota Yaris

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

These brief and simple instructions will show us how to disassemble and replace the cabin air filter or pollen filter of the Toyota Yaris. First of all, we open the front passenger side door and start by opening the glove box; then we release the side rods to lower it, and then remove the cover of the pollen filter box located at the back, as shown in the video.

At this point, we remove the filter cartridge and replace it with the new one, inserting the filter in the correct direction; we reassemble the plastic cover and the glove box!


Posted on 31 May 2025 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Toyota Yaris 4
How to replace the cabin air filter of the Toyota Yaris 4
Toyota Yaris (2020-2026 / MK 4) If you own a Toyota Yaris Mk4 and want to find out how to independently replace the cabin air filter, all you have to do is read the following guide …
Replacing the Cabin Air Filter on the Toyota Yaris XP130
Replacing the Cabin Air Filter on the Toyota Yaris XP130
Toyota Yaris (2011-2019 / Xp130) Let’s go through the steps to remove and replace the cabin air filter or air conditioning filter on the Toyota Yaris XP130. First, get inside the veh…
How to Replace the Cabin Air Filter on a Toyota Yaris
How to Replace the Cabin Air Filter on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In a few simple steps, we will see how to replace the cabin air filter or pollen filter on a Toyota Yaris. First, get inside the vehicle on the passe…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos