Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD2 port located in the Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014

The following video tutorial shows us the location of the OBD2 port on a Toyota Aygo vehicle. On Aygo vehicles, the port is installed inside the cabin, specifically under the dashboard on the driver's side just above the pedals; the port is easily recognizable thanks to its fluorescent white color. To use the port, it is necessary to get into the car and connect it to a diagnostic computer. Its use has become common in resetting service lights on cars and restoring error codes. The use and installation of the port became mandatory starting from the 2000s.

Posted on 9 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2005-2014 / MK 1, Ab10) In this video we can see where the cabin filter is located in the Toyota Aygo and how to proceed in case we need to replace it, an extremely simple a…
Toyota Aygo (2005-2014 / MK 1, Ab10) If you are unsure where the fuse box is located in your Toyota Aygo Mk1 (2005-2014), don't worry as this mini guide provides all the necessary inform…
Toyota Aygo (2014-2023 / Ab40, MK 2) On board the Toyota Aygo, each fuse is located within one of the dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse box…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos