Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Fuse Box on a Toyota Rav 4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Checks and maintenance

Access the fuse box on your Toyota Rav 4: open the cover and enter the vehicle's interior. Remove the trim in the glove compartment on the left side of the steering wheel using a plastic lever. Use pliers to disconnect the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Finally, close the fuse inspection box with the trim cover. Test the correct operation of the vehicle by turning on the instrument panel with the appropriate key.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses Located in the Toyota RAV 4?
Where are the Fuses Located in the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The fuse boxes installed in the Toyota RAV 4 contain the fuses that regulate the operation of the devices present in the car: you will find two boxes…
Where Are the Fuses in the Toyota Rav 4?
Where Are the Fuses in the Toyota Rav 4?
Toyota Rav 4 (1994-2000 / MK 1, Xa10) In the Toyota Rav 4, there are two fuse boxes containing all the fuses in the vehicle. The first is located inside the cabin, at the lower left part …
Where to Find the Fuses on a Toyota RAV4
Where to Find the Fuses on a Toyota RAV4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) On the Toyota RAV4, all the fuses are located within the designated fuse boxes present in the vehicle: in this model, you can find two boxes containi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos