Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the handbrake on the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

This short guide will show us the instructions that will allow us to adjust the handbrake lever on the Toyota Yaris. First of all, we get into the car and start by removing the plastic cover of the central tunnel; to do this, we unscrew the fixing screws located at the back, as shown in the video.

At this point, it will be possible to access the handbrake lever adjuster, so we screw the cable adjuster to pull the cable, as shown in the video. In order for the operation to solve the problem, it is necessary for the rear brake shoes to be in good condition.


Posted on 6 August 2025 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on the Toyota Yaris?
How to Adjust the Handbrake on the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To adjust the handbrake on the Toyota Yaris, completely remove the centre tunnel panel of the car. To do this, loosen the screw located at the back o…
How to adjust the handbrake on the Toyota Yaris?
How to adjust the handbrake on the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) .. In this tutorial, you will see how to adjust the handbrake on the Toyota Yaris, a very simple and quick operation. First, park the vehicle.. …
How to Adjust the Handbrake Cable on a Toyota Yaris Mk3
How to Adjust the Handbrake Cable on a Toyota Yaris Mk3
Toyota Yaris (2011-2019 / Xp130) In this short video, you will see how to adjust the handbrake cable on a 2013 Toyota Yaris Mk3 in simple and quick steps. First, get inside the vehic…

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos