Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob of the Toyota CH-R

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Shift knob

See other generations:
Video tutorial

These brief and simple steps will guide us on how to remove and replace the gear knob of the automatic gearbox in the Toyota CH-R. First, we get into the vehicle and start by detaching the gaiter from the knob; then we unclip the lower clip to pull the gear knob upwards, removing it and replacing it with the new original one, as shown in the video.

Make sure to correctly fit the new gear knob onto the lever, trying to avoid any play between the lever and the knob; finally, secure the gaiter to the knob!


Updated on 30 January 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Toyota C-HR
How to Replace the Gear Knob on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this short video, you will see how to replace the gear knob on the automatic gear lever of a Toyota C-HR. The procedure is very simple and quick; …
How to Disable Lane Assist on the Toyota C-HR
How to Disable Lane Assist on the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) You can disable the Lane Trace Assist on the Toyota C-HR by activating the instrument panel, navigating through the menu displayed on the instrument …
How to Reset the TPMS Light on a Toyota C-HR
How to Reset the TPMS Light on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Resetting the TPMS light, which indicates the tyre pressure on the Toyota C-HR, is a very simple operation that you can do independently, aided by ou…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos