Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Shift knob

See other generations:
Video tutorial

In this short video, you will see how to replace the gear knob on the automatic gear lever of a Toyota C-HR. The procedure is very simple and quick; push the gaiter down with your hands and widen the C-type retaining ring at the base of the knob. This can be done with your hands, but if you have difficulty, you can use a small flathead screwdriver for assistance.

At this point, you can remove the damaged knob and insert the new one, ensuring it fits correctly onto the gear lever. Lift the gaiter and attach the trim ring to the base of the knob.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob of the Toyota CH-R
How to Replace the Gear Knob of the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) These brief and simple steps will guide us on how to remove and replace the gear knob of the automatic gearbox in the Toyota CH-R. First, we get into…
How to Activate/Deactivate Traction Control on a Toyota C-HR
How to Activate/Deactivate Traction Control on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To deactivate traction control on a first-generation Toyota C-HR, stop the vehicle and keep the engine running. Locate the TRC/VSC OFF button, identi…
How to Replace the Remote Battery on a Toyota C-HR?
How to Replace the Remote Battery on a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the battery in the remote for a Toyota C-HR, lower the lever located at the bottom of the device so that the key can be extracted from its…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos