Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. C Hr
  6. : How do you replace the battery of the Toyota C-HR remote control?

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax50, Ax10, MK 1 - Years 2016-2023
Part: Key
Operation: How do you replace the battery of the Toyota C-HR remote control?

In order to replace the battery of the Toyota C-HR remote control, you need to lower the lever located at the bottom of the device so that the key can be extracted from its housing. Once the key has been removed, it will be possible to pry open the remote control from the inside of its housing. This way, the battery inside can be completely removed and replaced with a new one. After the new battery has been inserted, it will be possible to close the remote control and verify that it is functioning.


Posted on 17 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Toyota C Hr 2016-2023 - How to replace the key battery of a Toyota C-HR? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos