Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the 12V Battery on a Toyota CH-R

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

Below are the instructions for removing and replacing the 12V battery on a Toyota CH-R. First, open the vehicle's bonnet and start by removing the plastic cover at the top; then disconnect both battery terminals (positive and negative), as shown in the video.

Next, unscrew the battery bracket screw, remove it from its compartment, and replace it with the new one (of the correct type and with the same amperage); insert it in the correct orientation and connect it, then start the engine!


Posted on 22 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota C-HR
How to Replace the Battery in a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today’s steps will guide you on how to remove and replace the battery in a Toyota C-HR by following these simple instructions. First, open the bonnet…
How to Replace the Key Battery for the Toyota C-HR
How to Replace the Key Battery for the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button …
How to change the battery of the key for the Toyota C-HR 2
How to change the battery of the key for the Toyota C-HR 2
Toyota C Hr (2023-2026 / MK 2) If you are wondering how to replace the battery inside the key of your second-generation Toyota C-HR, all you need to do is read the following guide …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos